KK8 Smart Home Robot Vacuum Cleaner With Mopping Function For Floor

Quick Details

1.  Model No.: KK8
2.  Installation: Robot / Automatic
3.  Input Voltage: 100-240V
4.  Battery Capacity: 1500mAH
5.  Battery Voltage: 14.4V Ni-MH battery
6.  Capacity of Dust: 400ml
7.  Charging time: about 4h
8.  Working time: 80~90 minutes

Features:

1.  LCD screen on remote controller
2.  0.4L dust bin capacity
3.  Stair Avoidance Sensor
4.  Washable dust bin
5.  Low noise design
6.  Remote Controller can operate the work in different directions
7.  Up to 7-days daily scheduling function
8.  Mopping towel at bottom to do mopping while vacuuming
9.  Four different cleaning modes: auto cleaning mode, spot cleaning mode, edge cleaning mode, scheduling mode
10.  Easily take off the bag-less dust bin to discard the dirt that it picked up
11.  Automatic Self-Recharging: the cleaner will automatically seek charging base

when battery is going to finish.

•  Infrared sensor at bumper head to redirect the routine before collision (1-2 cm)
•  Easy to take out spare parts and replace, removable and washable rubbish box
•  With error code display function (the user can solve the problem by yourself)
•  Suitable for home and office floor, such as woodiness floor, artificial plastic floor,

waterproof carpet, ceramic tile, under coat carpet and etc;

•  HEPA filter traps dust, allergens and tiny particulates leaving behind fresh, clean air;
•  Dirt Detect technology employs an acoustic sensor to identify dirtier areas and spends more time cleaning the area clean;

Specifications:

Battery Charging:

Place charging home base against the wall, plug in adapter, and signal light on charging home base will

flash.

Note: Put charging home base against the wall and remove obstacles about 1 meter distance at two sides

 and 2 meters ahead.Turn on the power switch on the bottom side of the robot, and then display indicator will 

be in gradual blue,the robot is in standby. (If no command received,the robot will turn to sleeping mode

after 30 seconds.)

Note: 

A. Please always keep the power switch turning on. If not, it is unable to make the robot work. B. If power switch is turned off, all the scheduled operation will be lost.

C. Before charging the robot, please make sure the power switch is turned on, or else the robot can not be charged.

Charge the robot in either way as shown below:

Plug the adapter into the robot and the other end to the power socket as below on the left;

Press HOME button on remote controller to direct the robot to charging home base for charging.

Charge the robot in either way as shown below:

Note: 

•      Make sure the power switch at the bottom side of the robot is on before charging. Otherwise, CLEAN button indicator will have red flash and the robot beeps.
•      During charging, CLEAN button indicator will be in gradual red.
•      After fully charged, the robot will have 5 beeps. (Every charging will take no more than 5 hours).
•      For first use, please run out of the power and then fully charge the robot.
•      If the robot is not used for long time, fully charge the battery, turn the power switch off, and remove the battery and store in a cool, dry place.

Note: